Corrosion characterization of stainless steels used in semi cryogenic engine application
Implementing Organization
IIT Kanpur
Principal Investigator
Prof. Kallol Mondal, Department of Materials Science & Engineering
IIT Kanpur
stc@iitk.ac.in
CO-Principal Investigator
Mr. R. Santhosh Kumar, LPSC
IIT Kanpur
Project Overview
The main objective of the proposed work are
1.Corrosion behavior of the above steel samples at room and elevated temperatures as demanded
by LPSC
2. Polarization (cyclic, linear and potentiostatic), salt spray, immersion in 3.5% NaCl solution at
different pH
3. Characterization of rust phases by SEM, Raman Spectroscopy, XRD, and XPS
4. Structure-property correlation and suggesting protection
5. Analysis of formed and welding section of 15-5WPH & 12-10PH steel welds and heat affected
zones are highly important for the corrosion behavior point of view.
6. After analysis of the corrosion behavior as stated above, suitable and practical corrosion
protection at economical scale will be proposed.
7. The storage of the steels is also a critical concern for LPSC. Observation and experience from
LPSC, personal visit to LPSC by me and the student followed by discussion enabling to device
protection methods of the steels in storage.
Achievements
The project being undertaken by ISRO in collaboration with academia is directly or indirectly beneficial to the society.