Characterization and Modeling of High Voltage N/P LDMOS FETs for 180nm SCL Process
Implementing Organization
IIT Kanpur
Principal Investigator
Prof. Yogesh Singh Chauhan Department of Electrical Engineering
IIT Kanpur
stc@iitk.ac.in
CO-Principal Investigator
Dr. Hari Shanker Gupta, Shri. Amit Singh, SAC
IIT Kanpur
Project Overview
The main objective of the proposed work are
I. Electrical characterization of SCL LDMOS devices
a. DC I-V, C-V and RF measurements of 10-20V n & p-channel LDMOS transistors
b. DC I-V, C-V and RF measurements of 40V LDMOS-FET
c. I-V measurement at different temperatures
d. Analysis of measured data
II. Compact modeling and parameter extraction
a. Comprehensive modeling of DC characteristics in all regions of biasing
b. Inclusion of newly observed device effects in the model
c. Self-consistent model parameter extraction strategy for DC and CV characteristics for a wide
temperature and bias range of two types (20V LDMOS (n & p-channel) and 40V LDMOS (n & pchannel))
of devices
III. Deliver SPICE model cards to SAC
a. Verification of model card in HSPICE and Spectre simulators as per the requirement
b. Run model validation on dedicated circuit blocks as per the requirement
Achievements
The project being undertaken by ISRO in collaboration with academia is directly or indirectly beneficial to the society.