Dr. Gautam Agarwal Department of Metallurgical and Materials
IIT Roorkee
coordinator_spacetech@iitr.ac.in
CO-Principal Investigator
Dr. Anoop Kumar Shukla
Scientist SG Division Head, Special Metallurgical Facilities
IIT Roorkee
Project Overview
The main objective of the proposed work are
1. To fabricate defect free Al – 50 wt. % Si alloy cube shaped samples (20 mm length) using LPBF.
2. Developing a correlation between LPBF process parameters (laser power, laser spot size, laser frequency (if pulsed laser is available), hatch spacing, travel speed, deposition strategy, support pins) and solidification cracking tendency in Al-Si 50 wt. %. Identification of key process parameters which affect solidification cracking susceptibility.
3. To develop a 3D finite element (FE) based thermomechanical model of LPBF of Al-Si50 for understanding the effect of solidification conditions (weld pool shape, solidification morphology, cooling rate) and transient residual stresses on solidification cracking. The simulation tool can be used in future to choose optimum printing parameters which result in no/minimal cracking.
Achievements
The project being undertaken by ISRO in collaboration with academia is directly or indirectly beneficial to the society.