Investigation of wrought Ti-alloy and additive manufactured alloy under uniaxial and Biaxial loading for COPV liner application.
Implementing Organization
IIT Bombay
Principal Investigator
Prof. Sushil K. Mishra Co-PI: Prof. Amit kumar Singh Department - Mechanical Engineering
IIT Bombay
istec@iitb.ac.in
CO-Principal Investigator
Dr. G Sudarshan Rao & Dr. Anil Kumar V, VSSC, Thiruvananthapuram
IIT Bombay
Project Overview
The main objectives of this project are as follow
1.Evaluation of material strength, ductility, and hardness under the biaxial and uniaxial monotonic loading conditions.
2.Evaluation of loss in ductility under the biaxial cycling conditions with reference to the strain experienced during auto-frettage (MPT)Proof Pressure Test (PPT), and Maximum Expected Operating pressure (MEOP) cycles
3.Evaluation of the above properties on wrought Ti6Al4V and additively manufactured Ti6Al4V alloy.
4.Microstructure characterization (SEM, Optical, EBSD)
5.Fractographical investigation.
Achievements
The project being undertaken by ISRO in collaboration with academia is directly or indirectly beneficial to the society.