Development of
temperature sensors
based on platinumthin films
Implementing Organization
IIT Guwahati
Principal Investigator
Dr. Binoy Krishna Hazra,
Physics Dept. IIT Guwahati
IIT Guwahati
stc_iitg@iitg.ac.in
CO-Principal Investigator
Mr. Rahul Anand
LPSC,
Valiamala
IIT Guwahati
Project Overview
The main objective of the proposed work are
1. To fabicate amorphous, textured, and epitaxial Pt thin films in various thicknesses on different insulating substrates such as Si/SiO2,Al2O3, and MgO.
2. It is also planned to increase the resistance of the Pt by annealing the films in air at high
temperatures. Annealing at Air can increase the resistance of Pt thin film. The resistance will be measured over a wide temperature range, from −140 C to + 200 C.
3. Finally, an RTD sensor using a hard mask, which will eliminate the need for lithography in the device fabrication process will be fabricated .
Achievements
The project being undertaken by ISRO in collaboration with academia is directly or indirectly beneficial to the society.