This work primarily aims to develop the Forming Limit Diagram (FLD) for as-received annealed 2-mm thick KC20WN alloy sheets. Strain paths required for FLD construction will be obtained through Limiting Dome Height (LDH) tests using a hemispherical punch and hydraulic bulge tests. Incremental sheet forming (ISF) shall be performed to generate fracture-FLD (FFLD). Secondly, a subsize prototype (1:0.5 reduction) of a conical divergent nozzle will be formed by spinning process to assess the level of deformation (% strain) acheivable without cracking. Further, the effect of intermediate heat treatment (at 1145 °C for 20 minutes) on pre-strained component on the FLD and spin-forming response will be investigated. Post-forming analyses will include dimensional inspection (using CMM), thickness measurements, surface strain and roughness mapping, and hardness testing. Finite Element (FE) simulations using LS-DYNA with various material models will be performed to obtain in-depth understanding of the deformation behavior. Finally, advanced microstructural analyses using SEM, EBSD, and TEM will be carried out to study texture evolution and fracture morphology, facilitating optimization of formability and structural integrity of the formed components.
Achievements
The project being undertaken by ISRO in collaboration with academia is directly or indirectly beneficial to the society.