Effect of Annealing and machining on bulk thermal conductivity of Tellurium Copper, OFHC Copper and Aluminium alloys between 15K and 100K
Implementing Organization
NIT Kurukshetra https://nitkkr.ac.in/
Principal Investigator
PI: Dr. Ravi Verma
NIT Jalandhar
NIT Kurukshetra https://nitkkr.ac.in/
vermar@nitj.ac.in
CO-Principal Investigator
Shri Ashish Kumar Shukla
Shri Anandkumar F M Patel &
Shri Dinesh B Desai
Committee: SAC, Ahmedabad
NIT Kurukshetra https://nitkkr.ac.in/
Project Overview
Materials undergo heat treatment processes such as tempering, annealing etc. before they are used in any applications. These processes impact the internal microstructure of the material and this in turn affect material properties. Thermal conductivity of the bulk material also varies significantly with type and parameters of heat treatment. Since, thermal conductivity plays a decisive role in material selection during thermal design of space based and ground-based systems, it is necessary to investigate the impact of heat treatment processes and machining on the thermal properties of the materials. Data of thermal conductivity at cryogenic temperature depends on various aspects and not much work has been done in this field in India. This proposal aims to measure thermal conductivity of metals at Cryogenic Temperature. This project involves study of vacuum annealing and machining on the thermal conductivity of bulk materials. The bulk thermal conductivity of samples of OFHC copper (C10100), Tellurium Copper (C14500), and Aluminium alloys will be studied using an indigenously developed thermal conductivity setup in the temperature ranging from 15 K to 100 K. These studies will be useful towards ISRO's ongoing and future programs.
Achievements
The project being undertaken by ISRO in collaboration with academia is directly or indirectly beneficial to the society.