Design of Strain Sensor Arrays on Conformal Substrates with Wireless Interfaces for Space Applications
Implementing Organization
IIT (BHU) Varanasi www.iitbhu.ac.in
Principal Investigator
Dr. Oppili Prasad L
IIT (BHU) Varanasi www.iitbhu.ac.in
oppiliprasad.ece@iitbhu.ac.in
CO-Principal Investigator
Dr. Sreelal S, VSSC, ISRO, TRIVANDRUM
IIT (BHU) Varanasi www.iitbhu.ac.in
Project Overview
This proposal discusses about the design, fabrication and development of large-area strain sensor-arrays on conformal elastomeric substrate materials. Such strain-sensor arrays are very useful for monitoring the structural health of spacecrafts and launch vehicles, by obtaining a spatial information regarding strain-variations across the spacecraft structure. As one of the fundamental structural physical indicators, strain is of much interest for quantifying the mechanical performance of every spacecraft structure. Information regarding spatial strain variations across a spacecraft structure shall reveal the impact of acoustics and vibration on the spacecrafts, during launch, ground-testing, etc. Hence, in this project, we propose a novel design for a large-area strain-sensor array, where every sensor-element in the array shall be designed to be sensitive to strain-variations in the ranges of micro-strain levels. In addition, the entire sensor-array is proposed to be built onto a flexible and conformal elastomeric substrate, such that the same can be conformally pasted onto curved surfaces of spacecrafts, so as to efficiently measure the strain-variations across the structure. In addition to this, we also discuss about the design aspects of integrating electronic circuits onto the flexible substrate material, that can process the analog-signals received from the sensor-arrays and also wireless transmit the information to a remote computer terminal for continuous monitoring. This objective is proposed to be achieved by involving suitable packaging process-flows and fabrication techniques for realizing such flexible electronic circuits on elastomers. Development of wireless sensor-arrays on elastomers shall prove to be very useful in space-programmes, where an operator located in the ground-station can remotely interrogate the large-area strain-sensor system, to obtain desired information about the structural integrity of space-crafts through wireless interfaces.
Achievements
The project being undertaken by ISRO in collaboration with academia is directly or indirectly beneficial to the society.