×

img Accessibility Controls

Search

Filters
Loading...

Loading filters...

3069 result(s) found
In-situ Pollution Load Assessment of an Ungauged River using Integrated Water Quality and Hydraulic Modelling to Improve Restoration Strategies

The River Churni, a non-perennial, tidal, and ungauged river in West Bengal, faces significant challenges in monitoring and assessing water and sediment pollution. Contamination by anthropogenic chemicals and pollutants from industries, municipalitie

PI Name: Dr. Subhasish Das | Co-PI Name: Dr. Rajib Das
Section: Engineering Sciences (Research Project)
In-situ Synthesis of TiC-Ti₃SiC₂ super hard and tough Nanocomposite for Cutting Tool Applications and Its Evaluation

Cutting tool industries require materials with high hardness and toughness, which are commonly used in machining and tooling applications. However, India lacks tungsten ore, leading to a need for indigenization and the development of alternative mate

PI Name: Dr. Nisha Verma | Co-PI Name: Dr. Amar Patnaik
Section: Engineering Sciences (Research Project)
Laser Directed Energy Deposition of Functionally Graded Cu-ss316L structures for Power Generation applications

The demand for Copper and Iron-based Multi Metallic structures (MMs) in die and mold, power generation, and cryogenic industries is high due to their high thermal conductivity and strength. Fabricating defect-free Cu and Fe-based bimetallic structure

PI Name: Dr. srikanth Bontha | Co-PI Name: Dr. Ass Balan
Section: Engineering Sciences (Research Project)
Low order models for Thermoacoustic Instability predictions in Rayleigh Flows

The positive feedback loop between the heat release rate fluctuations and the acoustic pressure fluctuations inside the combustion chambers of systems like gas turbine engines, domestic boilers, industrial burners etc. lead to thermoacoustic instabil

PI Name: Dr. Aswathy Surendran
Section: Engineering Sciences (Research Project)
Photocatalytic Degradation of Persistent Pollutants Using Magnetic Ferrite/moo₃ Nanocomposites

Industrial pollutants such as dyes, pesticides, antibiotics, and phenols are becoming major sources of aquatic contamination. Various catalytic removal techniques have been studied, but none provide cost-effective and mild conditions for removing wat

PI Name: Dr. Smitha Thankachan | Co-PI Name: Dr. Manju Kurian
Section: Engineering Sciences (Research Project)
smart Irrigation scheduling Using IoT

Crocus sativus L. is a cost-effective spice used in various pharmaceutical, neutraceutical, and cosmaceutical combinations. However, saffron cultivation areas and production in traditional growing regions of J&K have decreased due to lack of quality

PI Name: Dr. Nowsheen Nazir
Section: Engineering Sciences (Research Project)
Sustainable solution for limestone shortage in cement manufacturing through Ca-rich bio ash

The rapid growth of cement manufacturing in India has significantly increased the demand for clinker and limestone, which is the primary ingredient of cement. The current practice of limestone consumption in clinker manufacturing is expected to exhau

PI Name: Dr. Ashita Singh
Section: Engineering Sciences (Research Project)
Understanding Flow Boiling Behaviour and Heat Transfer Enhancement with Ferrofluids under Externally Magnetic Field

Boiling heat transfer is a crucial process in various industrial applications, including boiler tubes, evaporators, cooling electronic chips, and nuclear power plant reactors. surface modifications and fluid properties are the main methods for enhanc

PI Name: Dr. Ajoy Debbarma
Section: Engineering Sciences (Research Project)
Understanding the Interaction between Microplastics and Heavy Metals in Wastewater – Distribution, Adsorption and Risk Assessment

Microplastics (MPs) have been identified in seawater, wastewater, fresh water, food, and air, as well as bottled and tap water. In addition to surface runoff and wastewater effluent (treated and untreated), MPs enter freshwater environments via combi

PI Name: Dr. Baranidharan Sundaram
Section: Engineering Sciences (Research Project)
Understanding the Role of Local Microsturucture on the Fatigue Crack Growth Using Crystal Plasticity Finite Element Modelling

Fatigue failure is a major cause of failure in mechanical components, often resulting from the nucleation and growth of surface or subsurface cracks. Cracks often nucleate near matrix and inclusion interfaces and propagate, depending on the local mic

PI Name: Dr. Nandu v Namboothiri
Section: Engineering Sciences (Research Project)
arrowtop
Latest Updates
Loading…